Get around with power and style on this cool electric scooter by Razor. Featuring a super-size deck and frame for riders ages 12 and older, the E300 can reach speeds of up to 15 miles per hour thanks to its high-performance, ultra-quiet chain-drive motor. The scooter also includes a pair of extra-wide 10-inch pneumatic tires to ensure a smooth ride while you zip around the neighborhood.
Other details include variable speed acceleration, a twist-grip throttle, and a rechargeable battery that delivers up to 45 minutes of continuous use per charge (the battery requires roughly eight hours of charge time). The charger and tools are included with the E300, though riders should note that some assembly is required.
The buyer and rider of the E300 scooter are responsible for knowing and obeying all local, state, and federal regulations regarding the riding and use of this scooter (a helmet, elbow pads, and kneepads are recommended). The E300 offers a weight maximum of 220 pounds and weighs 52 pounds.
Key Features:
Super-sized deck and frame for riders ages 12 and older
High-performance, variable-speed, quiet chain-drive motor for speeds up to 15 miles per hour
Twist-grip acceleration control
Hand-operated rear brake
Folding handlebar mechanism for easy storage and transport
Extra-wide 10-inch pneumatic front and rear tires for smooth ride
Includes two 12-volt sealed lead acid batteries, battery charger and tools
Up to 45 minutes of continuous riding per charge
Battery charge time of 8 hours
Maximum rider weight: 220 pounds
Safety equipment such as helmet, elbow pads and knee pads are recommended
Measures 41 inches long by 17 inches wide by 42 inches tall
Customer feedback:
1. The unit performed flawlessly. Speed was consistently 17mph and still running strong after 35 minutes (we've only done two test runs so far). Slightly tightened chain tension to about 1/2" after first run. Also, as noted by another reader, we looked everywhere for the rear tire inflater extension, only to find it inside the right handlebar grip cap. Good luck figuring that out when it isn't in the directions. The E300 is sturdily built - a lot more than I would expect for the money. I weigh 210 lbs and the structure doesn't flinch when I climb aboard (although the motor is clearly not intended for any hills or probably heavy riders).
2. We bought it in May 2006 and have used it almost daily since then. The scooter is fun and easy to ride. The only negatives are that the circuit breaker will trip while climbing steep hills (of course, that's what a breaker is for), and the batteries will no longer hold a charge. I expected the batteries to last longer than 6 months..jpg)
Saturday, August 22, 2009
Razor E300 Electric Scooter (Blue)
Razor E100 Electric Scooter
Cruise around the neighborhood in style with the Razor E100 electric scooter. Boasting a chain-driven, high-torque motor, and a handy twist-grip throttle, the E100 is the perfect device for pre-teens and teens wanting to zip over to a friend's house or head to the park. Unlike Razor's E300S and E500S scooters--whose motors start from a standing position--the E100 requires a small manual kickoff to 3 miles per hour before starting (the rider presses a trigger to engage the motor). Once the rider is on the move, however, the electric motor ramps up to 10 miles per hour--fast enough to have fun, but not fast enough to be a menace on the street or sidewalk. And thanks to the long-life rechargeable battery, which takes about eight hours to fully charge, riders can cruise for up to 40 minutes at a stretch.
Other details include a folding handlebar mechanism for easy storage and transport, an 8-inch pneumatic front tire and 4.9-inch polyurethane rear wheel, and a hand-operated front brake. The E100 is recommended for ages 8 and older and offers a maximum weight capacity of 120 pounds. It also comes with a pair of 12-volt batteries, a charger, and tools and is backed by a 90-day warranty. The buyer and rider of the E100 scooter are responsible for knowing and obeying all local, state, and federal regulations regarding the riding and use of scooters.
Key Features:
Powerful fun at speeds up to 10 miles per hour
Up to 40 minutes of continuous use
Chain-driven, high-torque motor
Twist-grip throttle
125mm polyurethane rear wheel
Rechargeable battery
Hand-operated front brake
8" pneumatic front tire
For Ages 8+
Weight Limit: 120 pounds
Razor Ground Force Electric Go-Kart
Suitable for riders ages 8 and older, the sleek silver-and-black Ground Force go-kart attains a maximum speed of 12 miles per hour, making it the perfect kart for zipping around flat trails or a cul de sac. The Ground Force's quiet variable-speed, chain-driven motor is powered by two 12-volt batteries, which deliver approximately 45 minutes of drive time per charge. The molded aluminum wheels and solid 4-1/2-inch tires, meanwhile, help the Ground Force run smoothly wherever it goes. And operation is a breeze thanks to the hand-controlled accelerator and hand brake. Other details include a durable steel frame, a shoulder seat belt, and a flag.
The Ground Force, which measures 41 by 16 by 29 inches (W x H x D), supports drivers weighing up to 140 pounds and is backed by a 90-day warranty. Some assembly is required, though the tools are included. The Ground Force is designed for controlled environments free of potential traffic hazards and not on public streets.
Specifications:
For riders ages 8 and up
140-pound user weight capacity
Can travel up to 12 miles per hour
Battery: Two 12V sealed lead acid batteries
Battery charge time: 4-6 hours
Delivers approximately 45 minutes of drive time per charge
Molded aluminum wheels
4-1/2-inch tires
Dimensions: 41 inches wide by 16 inches tall by 29 inches deep
Hand-controlled accelerator
Hand brake for stopping
Customer feedback:
1. I must say though, that I (a 40 year old man who weighs 165 pounds) LOVE this thing...It was fast, nimble and my neighbors got used to seeing me drive around the neighborhood. But, ahem, where was I? Oh yes, back to the kids. My 6 and 9 year old daughters love this car since it is significantly faster than their old Power Wheel car. I was even able to take my 6 year old out with it when I went roller blading and she was able to keep up with me and then some (we went out for about an hour (so figure we went about 8-10 miles since we weren't going the full hour.
That being said, it is way too fast for my 4 year old...and even my 6 year old who knows how to drive was doing a series of figure 8's in the street at max speed and loving it...when she lost control and ran full speed into the curb...she was NOT a happy camper, although she wasn't seriously hurt. The car does sit low though...so if a child were to run under an SUV...there is a very real chance the child could be seriously hurt though because their face would smack into the bumper...so PLEASE be mindful.
2. You will need a fairly large smooth area (like a parking lot) for your kid to use this go-kart. It doesn't take bumps well being so low to the ground. The kart is small, so can fit in minivans/SUVs/wagons for transport.
Assembly is simple for those who are mechanically inclined, made challenging only by the poor manual (more on that below). You put the steering wheel on (it requires a plastic inset on top and bottom and to make sure the bottom bolt is very tight) and put the seat on (may require taping down the wires under the seat). Add the flag and you are done.
Razor Dune Buggy
Want to give your child a little off-road entertainment? Turn to the Razor dune buggy, the ultimate in electric-powered backcountry cruising. Outfitted with a powerful 350-watt motor designed to reach speeds of up to 10 miles per hour, the buggy is fast enough for serious fun, but slow enough that it won't compromise your child's safety. Parents will also appreciate the side roll cage, which creates a barrier between the rider and the outside, and the padded bucket seat, which includes a seatbelt for added security. And thanks to the buggy's specially designed reduction drive, the vehicle is capable of both lower torque climbing and high torque gearing. Perhaps the coolest feature, however, is the fully electric design, which is not only easy to charge, but requires no fuel at all, runs quietly, and produces no emissions.
Other details include eight-inch knobby pneumatic tires, an active rear suspension, a durable tubular steel frame with diamond-plate floorboards, hand throttle and brake controls, a rear disc brake, and a safety flag. Ideal for difficult tracks and terrain, the buggy supports up to 120 pounds of weight and is suitable for ages 8 and older.
Key Features:
For ages 8+
220-pound weight limit
Can reach speeds of up to 10 miles per hour
350 watt motor
8 knobby pneumatic tires
Bucket seats with seatbelt
Powder coated finish on tubular steel frame
Protective padding
Diamond plate floorboards
Hand throttle and brake controls
Rear disc brake
Safety flag
Vertical storage
Customer feedback:
1. THIS KART IS AWESOME! In addition to arriving fully assembled, and charged up, this thing does everything it claims. It's got great torque, crawls right through mud and over bumps and uphill, and is a very well constructed little buggy. Like the MX350, I would prefer a footbrake, because my 3 year old can drive this thing, but can't squeeze the hand brake. OH well, he's younger than the recommended age so this is on me. THe motor provides more than enough " engine braking" anyway to bring the thing to a pretty rapid halt when you let off the gas. I am verypleased in every way with this buggy.
2. After having a "real" Dune Buggy years ago, I purchased two Razor Dune Buggies for my grandchildren for Christmas (6 1/2 and 8 yrs old). The order was delivered much faster then expected and the only thing I had to do is add a little air to the tires and charge the batterys. The Buggy is built extremely well and because the tires have groves for off road riding, it moves over grass and smooth surfaces much better then other ride on toys. The hand controls were easy for the kids to operate and the 6 1/2 yr old had no problems at all. And "yes" it definitely travels FAST enough!
I believe a child over 10 yrs old would probably be too large to ride comfortably, but the Buggy would probably carry them easily any way. The battery lasted a good 45 minutes or more, and ran full throttle most of the time. 
Razor MX350 Dirt Rocket Electric Motocross Bike
Essentially a scaled-down motocross bike with an electric motor, the Razor MX350 Dirt Rocket is ideal for pre-teens and teens (ages 12 and up) who want to enjoy the dirt bike experience without breaking the bank. The Dirt Rocket's powerful motor carries riders at speeds of up to 14 miles per hour--more than enough for most bumpy dirt trails--and can cruise for up to 10 miles (or 40 minutes) on a single charge. At the same time, the bike's riser handlebars deliver a smooth and comfortable ride regardless of the terrain, so the fun isn't restricted to flat pavement. As a final bonus, the Dirt Rocket's variable-speed, chain-driven motor is extremely quiet, a marked contrast to traditional gas-powered motocross bikes.
Other details include 12-inch pneumatic knobby tires for a maximum power transfer, authentic dirt bike frame geometry, and a retractable kickstand. The MX350, which requires roughly eight hours to fully charge, offers a maximum weight limit of 140 pounds. It's also backed by a 90-day warranty.
Features:
Twist-grip throttle acceleration control
Double crown fork
12-inch pneumatic knobby tires
Folding metal foot pegs
Hand-operated rear brake
Adjustable riser handlebars
Chain driven motor for quiet yet powerful operation
Rechargeable Battery
Retractable kickstand
Tools included
Seat height - 20 inches
Specifications:
Run Time: Up to 40 minutes of continuous use
Battery: 24V (two 12V) sealed lead acid batteries
Battery Charge Time: Approximately 8 hours
Speed: Up to 14 MPH
Max Rider Weight: 140 pounds
Ages: 12+
Product Weight: 72 pounds
Razor Pocket Mod Miniature Euro Electric Scooter
Cruise the side streets in style with this Euro-style electric scooter from Razor. Featuring a high-performance, chain-driven electric motor and a vintage-inspired body, the Pocket Mod can reach speeds of up to 15 miles per hour--plenty fast enough for a quick trip to the corner store or a fun ride in the country. The scooter also teams a pair of 12-inch pneumatic tires with a rear suspension system to ensure a comfortable ride. Other features include a retractable kickstand, variable-speed acceleration, a padded seat, and a built-in battery that travels for up to 10 miles on a single charge.
The buyer and rider of the Pocket Mod are responsible for knowing and obeying all local, state, and federal regulations regarding the riding and use of this scooter. The Pocket Mod, which is designed for ages 12 and up and offers a weight maximum of 150 pounds, is also backed by a 90-day warranty.
Key Features:
High performance electric motor
Can travel up to 10 miles on a single charge
Can reach speeds up to 15 miles per hour
Scaled-down classic scooter design
Single speed, chain-driven motor for maximum power transfer
Pneumatic tires for a smooth ride
Retractable center-mount kickstand
Storage compartment under seat
For ages 12+
150-pound weight limit
Customer feedback:
1. When my 11-year old started begging for an electric scooter, we were very hesitant. A neighbor has one and it's the stand-up kind with a VERY loud motor that drives us nuts on the weekends. We gave in, and went shopping. While we were reviewing the standing scooter, we noticed the Razor Pocket Mod and it was the SAME PRICE! I, of course, thought it was adorable and my daughter was easily swayed.
It was easy to put together and charge, however pumping the tires was a wee bit difficult just because of the angle required. The tires are nice and fat/sturdy, too, so riding offroad or over small rocks wasn't an issue. The biggest thing we noticed though, was that it is AMAZINGLY QUIET! What a blessing compared to the neighbor's noisy scooter! It practically 'purrs' and you don't even hear it until you are right next to it.
Seeing her ride it is incredible! It is VERY easy for any child that can balance and ride a bike. The handle brakes/gas takes a bit of getting used to, but after a few days she was a pro! Her papa rides a motorcycle, so he was dying to check it out. Weighing in about 180lbs, he was able to ride it as well! My daughter got a big kick out of that.
2. This is a great value for the money. Arrived in two days. Perfect condition. Took about 10 minutes to put together. Best of all there is a wall plug to charge it. No messing around with batteries. Just plug into the wall and into a slot on the bike. Came fully charged. My daughter rides it every day. It is as fast as reported. Batteries charge in less than the eight hours. Usually takes around 5 if they are fully discharged. Great bike.
Razor Dirt Quad Electric Four-Wheeled Off-Road Vehicle (Red)
Kick up a fuss with the Razor Dirt Quad, a miniature electric off-road quad that's perfect for trail riding. The compact vehicle--which supports up to 120 pounds--offers such features as authentic dirt quad frame geometry, a high-torque gear ratio that provides excellent climbing opportunities, a terrain-tracing droop-travel rear suspension that delivers a smooth ride, shatter-resistant plastic fairings, and a powder-coated tubular steel frame that's durable in all weather conditions. Best of all, the variable-speed, chain-driven motor is both super quiet and powerful, helping you zip up the trail in a hurry without disturbing the locals. As a bonus, the Dirt Quad can store either horizontally or vertically depending on your space.
Key Features:
Powered by a 350-watt motor
Reaches speeds up to 10 miles per hour
High-torque drive train with built-in torque reducer produces incredible off-road and climbing capabilities
Constructed from shatter-resistant plastic fairings on a powder-coated tubular steel frame
UL listed; requires 6-volt rechargeable battery and charger, included
Eight hour charge time provides 40 minutes of riding time
Terrain-following droop travel rear suspension
Handlebar steering with hand throttle and brake controls
Large pneumatic tires
Rear disc brake, padded seat and front "brush bar"
Rear carry handle and safety flag
Dimensions: 50 inches long by 30 inches wide by 20 inches tall
Maximum user weight capacity: 120 pounds
Customer feedback;
1. I've seen my share of wheeled toys, and was positively impressed with the quality of this product. It has a solid frame, suspension, regular inflated tires. I'm not afraid that after a few days of use it will break, given the rough use it will get of kids at that age. I took it for a short test drive myself, and the motor was strong enough to move and adult uphill.
Update (5/28): This ATV has seen a lot of use in the last few weeks, including many sliding wheel stunts, etc. After one particularly heavy right it stopped working with a blown fuse and control box. The one thing which is quite helpful is that Razor will actually sell repair parts for reasonable prices on their website, more than can be said about many other products. So if it does break, it's not necessarily doomed for the trash pile.
2. I have two children that own a dirt quad. The first child got one for a birthday gift, the second liked it so much that she got one for christmas ! These are quite well built, and very capable of handling difficult terrain. The only problem you have to avoid is too much water exposure. The quad can do some puddle jumping, but dont soak it.We have been very pleased with these quads..jpg)
Wednesday, July 29, 2009
Bye Bye Standby BBSBUSA Energy Saving Kit
Bye Bye Standby is a brand new energy saving solution designed to reduce the daily energy consumption of electrical devices. Bye Bye Standby works by completely cutting power to the devices plugged into it when they're not in use, thus saving the power that these devices would otherwise have consumed in Standby Mode. Bye Bye Standby is a new way to save energy, carbon emissions and money.
Technical Details:
Fully cuts power to your electrical devices at the flick of a switch
Reduces your monthly electric bill by turning off electrical devices left on standby
Prevents the release of carbon emissions by shutting off appliances not in use
Easy plug-in installation
Includes convenient remote control of electrical devices
Thursday, July 2, 2009
A train coach decorated with the symbols for Euro 2008 soccer at Kleine Scheidegg station
Euro 2008 was a big event for soccer / football in Switzerland, with motifs and advertising everywhere. And so it was, that on this train ride to Jungfrau, at a considerable height, we saw this train coach with the symbols for Euro 2008 painted on the outside.
Wednesday, May 27, 2009
Black & Decker SZ360 3.6-Volt Ni-Cad Cordless Power Scissors
These scissors offer way more cutting power than just about anyone can muster with muscle alone, and best of all, it’s effortless. You can’t help but love a product that makes life so much easier, especially for folks who suffer from arthritis. You can cut nearly anything with these, from delicate pattern paper to sheet vinyl flooring and window screening, with just the press of a button. Our favorite job for these, though, is to easily slice into that impossible-to-open, hard plastic packaging that seems to be on most everything these days. It’s no match for these scissors.
When power scissors first came out, there wasn’t too much concern about ergonomics, but we know so much more these days about how important that is. Black & Decker’s made this power tool a treat for the body to use, with a nice cushy grip, super light weight and no force needed. One charge will keep you cutting for 70 minutes, and then you just plug it in and charge it again. There’s no end to what you can use these power scissors for – gift wrapping, sewing, scrapbooking, decorating, jobs around the house, crafts, clipping coupons.
Technical Details
* 3.6-volt cordless power scissors cut through a wide variety of delicate and tough materials
* Ergonomically-shaped handle for comfortable, non-slip gripping
* Provides up to 70 hours of continuous power with each full charge
* Includes universal cutting blade and charger
* 2-year warranty
Customer feedback:
1. I purchased these scissors after seeing them advertised on the (....) tube. After seeing the price I figured what could I lose I mean really, I've spent more on lottery tickets and ended up with nothing to show for it. I charged the scissors for 12 hours as per the instructions and then went on a cutting frenzy!
Ok so enough blabbering, the scissors are a great product at a good price, just be careful not to become a power scissor bandito or you and I are going to have it out on the white paper of life!
2. The Black and Decker Cordless Power Scissors, along with Black and Decker's Cordless Screwdriver
and the Black & Decker Handisaw were just what we were in the market for. While I had often thought about buying them in the past, this seemed to be a perfect time to finally make the purchase. Just in time to use for the cutting and wrapping of our family Christmas presents. Because my wife has a plate in her wrist using regular scissors is sometimes, literally, a pain for her. Not so with the Black and Decker Cordless Scissors. She has said these just glide right through. She doesn't have to work the scissors, she said she just holds them and goes along for the ride! Not having any wrist or hand fatigue to deal with is a blessing. Works as smooth as a knife through butter!
Sunday, May 10, 2009
Toro 1800 18-Inch 12 Amp Electric Curve Snow Thrower
Clear driveways, walkways, and patios quickly and easily with the Toro 1800 Power Curve Electric Snow Thrower. Compact yet powerful enough to toss snow a distance of 30 feet, this machine is easy to operate and maintain, so you can enjoy the next snowfall without having to worry about whose turn it is to shovel. Toro's patented Power Curve System employs a unique, curved rotor and a funnel-shaped housing, in addition to wide rubber paddles that propel the machine forward and clean all the way down to the pavement. This technology lets you move more snow in less time, and it virtually eliminates clogging, so you can be confident that your snow thrower will be ready the next time a winter storm comes your way.
With a snow removal capacity of 700 pounds per minute, the Power Curve lets you clear four inches of snow off a 50-by-20-foot driveway in just 10 minutes. The machine's clearing width of 18 inches means that you can clear most walkways with just one or two quick passes. And with a snow cut depth of 10 inches per pass, you won't need to repeat work you've already done, unless you're in the middle of a serious blizzard.
Technical Details
* Electric curve snow thrower; simple trigger start and no parts to lubricate
* 12 amp electric motor throws snow to 30 feet, cuts 10-inches deep and 18-inches wide per pass
* Durable plastic body; metal handle; minor assembly required
* Includes 160-degree adjustable chute, safety key lock
* 47- by 18- by 36.2-inches; 24 pounds; 2-year warranty
Customer feedback:
1. You only have to look at this 25 pound wonder to know its not a heavy duty snow blower. So don't think it is going to do the job of a huge gas powered rig. Having said that - I have a 50ft two car wide driveway. It flings 5 inches of snow off that driveway in 10 to 15 min. I love it. I cant wait for more snow. It should have no problem with a foot of snow. its like a high powered snow vacume
You just plug it in and go. No gas, no spark plugs, no oil, no tune up. I am often done before the neighbor has cussed enough to get his gas monster (with head lights) running. I have full confidence in this rig.
2. PROS:
- Lightweight and compact, so can be stored in shed easily.
- Electric, so virtually no maintenance.
- The electric motor is surprisingly powerful.
- Simple to set up and use.
- Works very well with dry, powdery snow.
- Quality construction, and zero problems in past five years.
CONS:
- Lack of torque and lightweight plastic construction means that it cannot handle compacted, icy, or wet snow. (This is when you feel like junking this tool.)
- There should be a mechanism that 'locks' the electric cord connection to the thrower, so that the cord doesn't keep disconnecting.
- The handle should retract and telescope for leverage and also to facilitate storage.
- The tiny plastic wheels must have come from a toy factory. They provide no traction and are merely useless appendages.
Lamello 101053UHMZ Top 20 S3 4 Amp Plate Joiner
The Lamello’s slide shoe, fence and multi-function stop square are all made from one piece of machine milled metal. Lamello is the only plate joiner in the world constructed like this. This quality of construction ensures perfect accuracy, literally for decades. Joints will always line up perfectly flush, saving you time, money and aggravation for years. Lamello’s plate joiner can cut grooves for 9 different biscuits without changing the cutting tool. The swiveling fence has positive stops at the most common cutting angles (0, 22.5, 45, 67.5 and 90 degrees). The multi-function stop square slides and locks on to the bottom of the slide shoe to make vertical use of the tool very quick and safe. The Top20S3 plate joiner also has Lamello’s patented step memory system. This allows the user to micro-adjust the cutter up or down in increments of 1/10th of an mm (4mm total distance from top position to bottom position). This makes joining offset pieces quick and accurate. The Top20S3 also features an electronic, soft start motor. If you’re looking for quality, durability, accuracy and versatility, the Lamello plate joiner can’t be beat. This unit comes in a wooden case and includes plate joiner with 6 tooth scoring cutter, dust bag, 36mm suction stub, 23mm suction stub, chip ejector stub, stop square, 4mm slip on plate, set of tools and owner’s manual. 6 tooth carbide tipped cutter with scoring teeth. Suction (vacuum connection 23mm) stub, extractor stub 36mm, dust bag, square stop, slip on plate 4mm, tool set, instructions, wood carrying case. Simple preparation of joints even with projecting or rejecting areas. Soft start for smooth acceleration. Overload protection system prevents motor damage due to overheating.
Technical Details
* 4-amp plate/biscuit joiner with a 6T carbide-tipped cutter
* Height adjustable cutter lets you adjust the groove position to exact center of the work piece
* Electronic soft-start motor; step memory system
* Includes dust collection bag and wood storage case
* Weighs 15.6-pounds
Customer feedback:
1. I had an old SKIL biscuit joiner for years and it did an OK job, but it was tired and a new one was in my immediate future. I researched and asked friends and of course they all loved the one they had. Most satisfied were the Porter Cable folks. So I borrowed a friends PC and used it on my last project. Decent machine, but not a life long product for a busy woodworker and the adjustments didn't seem as easy as the Lamello. I decided to get the Lamello and waited for 3 or 4 months checking the price on Amazon daily and when it dipped to $649.00 I jumped on it. WOW! What a machine. I hated that it took me so long to pull the trigger, but it beats everything I have seen or used hands down. The adjustments are SIMPLE and ACCURATE!! This is clearly a case of you get what you pay for.
2. The only thing I can really say is...buy the best & forget the rest...you won't regret it. Or you can do like I did. First buy a cheaper biscuit joiner, find out you get what you pay for, then spend even more money to buy what you should've bought in the first place.
Just a superb biscuit joiner. Very nice soft start. Zero slop & I do mean zero. Pinpoint setting adjustments. Dust bag is OK, but it's a dust bag. Hook it up to a shop vac for complete dust control. If you want to use the Lamello Top 20 to join face frames or use it for other small applications, get the H-9 cutter head & applicably sized biscuits.
DEWALT DW682K Heavy-Duty 6.5 Amp Plate Joiner
Fast, precise, and easy to handle, the DeWalt DW682K Heavy-Duty 6.5 Amp Plate Joiner puts 10,000 RPM to work for you. A perfect pick for woodworking applications, this reliable joiner utilizes a dual rack and pinion fence to deliver consistent, accurate joints. You can produce clean, flush cuts at 0-degrees without having to remove the adjustable fence, which tilts from 0 to 90 degrees for versatility. The thoughtful design of this tool even includes preset depth stops for common biscuit sizes and a 45-degree notch in the fence that permits easy indexing using the outside surface of a mitered joint. Other useful features include retractable, anti-slip pins that hold whatever you're working on securely in place and heavy-duty aluminum shoe with a non-marring surface to protect your materials and permit clamping of the joiner for accurate stationary performance. This kit includes a six-tooth carbide blade, a convenient dust bag, a vacuum adapter, torx key, wrench, and durable kit box for easy transport. This DeWalt high-performance industrial tool is backed by a 3-year limited warranty,
Technical Details
* 6.5 Amp motor delivers 10,00 RPM for fast, reliable cutting
* Adjustable fence, which tilts from 0 to 90 degrees and allows flush cuts for versatility
* Non-marring shoe, retractable, anti-slip pins, and preset depth stops provide convenience
* Measures 15.8 by 6.4 by 6.8 inches; weighs 12 pounds
* Includes joiner, dust bag, vacuum adapter, torx key, wrench, kit box, and 3-year warranty
Customer feedback:
1. First, the rack & pinion design of the fence makes this a very stable and accurate tool. It is powerful and the grip and switch location is convenient. When used without the vacuum attachment, this machince shoots the chips right at the operator. However I always use a vacuum attachment because I don't like having all those chips all over the shop anyway, so this is not a serious draw back. The Porter Cable which is priced competitively offer a smaller blade option for face frame construction but the handle is awkward and the fence is sloppy. This tool works great. It is accurate, dependable and easy to use. You could buy a more expensive tool and get a greater degree of refinement but if all you want is a dependable tool that does its job well. I recommend this.
2. Since I wear hearing protection with ALL power tools I cannot comment on how loud it is. (My ears don't ring all the time, either.) The dust bag, as is usual with all dust bags, doesn't work and I haven't used it since the first try. The shop vac does the trick.
It has worked flawlessly on everything from positioning slats in a headboard (OK, I could have used mortise-and-tenon joints, but there were a LOT of slats) to attaching edging to plywood, to table-top glue-ups. The only biscuit failure I've had was when I tried to use it to attach the aprons to the legs on a children's play table. Some places NEED better joinery!
MK Diamond 160267 MK-770EXP 1-1/2-Horsepower 7-Inch Wet Tile Saw
A new and improved version of MK's 770 tile saw; the 770 EXP features twice the horsepower for easier cutting and a larger cutting capacity. Simple enough for the do-it-yourselfer, the 770 EXP is preferred by professional craftsman for its pro-grade design features. A 7-inch blade cuts tile up to 20 inches straight on, and easily makes diagonal cuts through tile pieces up to 14 inches in size. An innovative cutting head assembly makes precision 45-degree miter cuts with ease. A single adjustment point positions the blade at an exact 45-degree angle in seconds. This beefy workhorse cuts tile and marble like butter, and its heavy-duty, zinc-plated steel frame and cast aluminum components offer solid support for optimal precision. A high torque, 1-1/2 horsepower universal motor is tough enough to cut tile all day. A tilting head means quick and easy miter cuts. Your purchase includes a 7-inch MK-225 Hot Dog Blade, water pump, and rip guide.
FEATURES
* Includes 7-inch diamond blade, water pump and rip guide for quick setup and versatility
* Built-in fully adjustable miter system for precise 45-degree angle cuts
* A single adjustment point for precision orientation of the blade in seconds
* Variable height cutting head for plunge cutting with blades 7 inches and smaller
* Chrome guide-bar and linear-bearing assembly for precise alignment and precision cutting
Customer feedback:
1. This is the saw that home improvement centers should carry. I do 10-15 tile jobs per year for friends and friends of friends plus myself and family. I do not need a $900 10" saw. However this saw rips and diagonals the same size tile. It has the same adjustments and capabilities as the more expensive saw. It may not have last as long as the saw doing 50-75 jobs per year, but neither will I. This saw will give the average DYI the opportunity to make their job professional. A great saw at a fair price that will last a lifetime, versatile, easy to use, and accurate.
2. This saw is an upgrade for me from the MK 770, and I could not be happier with my purchase, or the manner and short time in which it was delivered to my business.
All the spec's, details, photos and prices I needed were there before me on screen, to do all the comparisons I needed between saws and prices. I have used various MK products through my life and always relied on them for their dependability and accuracy.
This is the first online purchase I have ever made with Amazon.com, and will by no means be the last!
Hitachi C10FCE2 10-Inch Compound Miter Saw
With the C10FCE2 10-Inch Compound Miter Saw by Hitachi, you'll make quick work of projects such as crown moldings, picture frames, and other angled cuts in two planes. Featuring a 15 Amp motor and a no-load speed of 5,000 RPM, this saw will let you handle even the toughest cutting jobs with ease. The 10-inch blade lets you make long cuts to save time, and the thumb-actuated positive stops let you select preset points at specific angles, resulting in less set-up time and faster adjustments.
A compound miter saw is essential for making compound cuts, thanks to its ability to tilt on both of its axes. The C10FCE2 has a 0-to-52-degree miter angle range to the right and left, and a 0-to-45-degree bevel range to the left with bevel stops, giving you the range and precision you need for exacting work. The saw's horizontal handle with an elastomer grip reduces vibration and increases comfort and maneuverability. A dust collector attachment reduces airborne particles for your comfort and safety.
Technical Details
* Carbide blade included
* 15 Amp motor
* Large pivoting fence
* 5,000 rpm
* Bevel angle 0-45, miter range 0-52
Customer feedback:
1. I bought this same saw about a year ago at Lowes, I paid something like $150 for it. It's a great saw, really smooth and comfortable to use. Works great for cutting trim boards, but I've also used it as a chop saw to cut 2x6's, it doesn't bog down one bit when cutting larger stock. It's a little heavy, but to me that just means it's built better. It's also quiet compared to other miter saws I've used. This is definitely a great deal! I'm almost tempted to buy a second as a backup!
2. This saw is very powerful relative to other models in this price range. I had looked at the Dewalt saws, but didn't really think the quality of construction was the same since Black & Decker bought them out a few years back. I've used this to cut 4x4" treated posts and it slices through them like a hot knife through butter, with no motor lag at all. The sawdust catch-bag is a nice feature, but doesn't catch it all. I wasn't expecting it to, and having ANY of it get caught is a plus, and simply less clean up for me once the project is finished.
After receiving this saw, I did some research and found out that all Hitachi power tools have a 5 year limited warrantee. I've blown through 3 drills - 1 Skil, 2 Black & Deckers (guess I didn't learn) - on my trip to the Hitachi brand, and will never buy anything but Hitachi tools from here on out. I would recommend this tool to anyone that is looking for a professional quality tool at a decent price.
Grip-Rite GRTMP16 16d Mini Air Nailer
Do yourself a favor and stop swinging that hammer in tight spaces. This small but powerful tool will reach almost anywhere and drive up to a 3-1/-inch 16d sinker framing nail. When the engineers at Grip-Rite asked professionals how to improve their palm-sized air nailers, they all said they wanted a smaller tool. So, Grip-Rite created a tool that fits the most common applications at 1/3 the size and weight. After one use, you will wonder how you ever lived without this innovative tool.
Technical Details
* Drives up to 3-1/2-inch 16d sinker framing nail
* Magnet holds nail for easy starts
* Lightweight at only 1.1-pounds
* Compact, fits-inch your pocket or tool pouch
* One-year factory warranty
Customer feedback:
1. Very handy, won't replace your nail gun but will drive nails where you can't use a hammer, screw gun, or nail gun. Only short coming was toe nailing, but it more than makes up for that with what it does well. I used it to put up 3/8" soffit under eaves. Looped Mini Air nailer air hose over ladder with nail in it. Positioned soffit, held soffit with one hand and used nailer with other. You can reach out while holding on to ladder and drive nails one handed, so much lighter than nail gun. Worked very well driving nails next to fascia. If I wear it out I will replace it.
2. After seeing this tool on the Cool Tools show on tv, I bought three of them, one each for my dad and stepdad and one for my father in law for fathers day. They were amazed at the power and stability of it and all three said they would never use a hammer again unless absolutely necessary! I'm a woman and I tried it myself and it was so easy. It can get into tight spaces where hammers can't. Driving the nails is effortless and it gets the nails flush and there are no hammer marks on your wood. This definitely is a cool tool! I would recommend this to anyone.
Skil 2336-02 iXO 3.6-Volt Cordless Screwdriver
The Skil 2336-02 iXO cordless drill/driver is a palm-sized powerhouse that holds its battery charge even after 18-months of non-use. And while the size is small, the tool still packs a punch powerful enough to tackle most home improvement projects, from assembling furniture to drilling holes. The tool can provide drilling capabilities to hang photos or curtains, as well as driving screws to assemble furniture. The iXO boasts user-friendly design features suchas a forward/reverse indicator and a Soft Grip handle. The Skil iXO's compactness and convenience make it an ideal tool for every day use.
Technical Details
* 3.6V Powerful enough for most household tasks
* Accepts full charge anytime without memory effects
* Lithium-Ion Power Battery holds charge up to 18 months
* Forward/Reverse LED Indicator shows drilling direction
* Weighs just 10 ounces for less user fatigue
Customer feedback:
1. I've used this screwdriver for everything from hanging wooden blinds, installing child locks on the kitchen cabinet doors, and removing and replacing the switchplates when I paint a room to name a few. Its small and easy to use but is still powerful. This new lithium ion battery stays charged for months but the IXO can be stored on the charger without damaging the battery. I like the fact that it is always charged when I need to use it. I originally received the Skil iXO as a gift and liked it so much that I've purchased several more to give as gifts.
2. I love this little cordless drill. I bought it because it was small and lightweight and I've been very impressed with it's long-lasting charge and more than adequate torque for around the house. The grip is the perfect size for my hands. My husband has very large hands and loves his big drills, but doesn't mind using my little drill for small projects.
Skil 2372-01 7.2-Volt Li-Ion Power Wrench
The Skil 2372-01 7.2-volt Lithium Ion Power Wrench, is an indispensable item in toolboxes. From furniture or toy assembly to deck building, the Lithium Ion Power Wrench makes getting projects done a whole lot faster and easier. No matter the task, the new Skil 2372-01 Power Wrench has the features and the power to help complete any project successfully. The Power Wrenchaccepts all standard ¼-inch sockets, which enables do-it-yourselfers to use many of the sockets in his or her current toolbox. In addition, the new Skil Power Wrench has both forward and reverse operations as well as an adaptor to convert the Power Wrench into a right-angle drill/driver. These features virtually eliminate tight spaces that could not be reached in the past by other power tools. And despite its compact size and weight (just 1.8-pounds) the all metal gear train and durable metal front ensure an extended life for the tool. The wrench delivers 75-inch-pounds of torque in auto mode and up to 400-inch-pounds of torque in manual mode.
Technical Details
* Compact design makes the wrench easy to handle while working in tight spaces, or in areas where regular drill/drivers won't fit
* Forward and reverse operation allows for assembling or disassembling projects
* Lithium ion battery holds a charge for up to 18 months of non-use so it's always ready to go when a project comes up
* Skil Smartcharge System is built in to the charger, providing overcurrent protection and allowing the tool to be stored on the charger indefinitely without damage to the battery
* Charger is designed for tabletop or wall mounted operation
Customer feedback:
1. If you need a mechanic's type tool set for work; this tool is not for you. If you want a tool capable of busting loose lug nuts to change tires, this tool is not useful for that. You get the point, this tool is not an "All in one", "Do Everything" tool - nor is it advertised as being one.
What this tool does do well is handle small jobs around the house. I have many corded and cordless tools as well as a couple of air tools. I use those for my heavy work. However, for around the house, this kind of tool can't be beat for convenience. It's lightweight, can get into small spaces and if the power isn't quite enough for what you are loosening or tightening, then you can use it like a manual wrench and it will do whatever your muscles will allow you to do.
2. I just got this a few weeks ago for Christmas and already used it a few times. Was thrilled with the offset capabilities of the tool. It may be called a wrench (and it's main job is) but with the adapter and bits that come with the set I have used it for offset and tight driving problems also (phillips, torx, hex, etc.) A pleasure to have in my tool collection.
Skil 2352-01 3.6-Volt Lithium-Ion Multi-Cutter
3.6V, Lithium Ion Cutter, Holds A Charge Up To 18 Months, Auto Sharp Blade Design, Lightweight, Less Than 1 LB, Battery Fuel Gauge, Cuts Through Hundreds Of Materials, Including: Carpet, Plastic Packaging, Fabric & Leather, Paper & Cardboard, Vinyl Flooring, Wallpaper & More Up To 1/4" Thick
Technical Details
* Holds the charge up to 18-months
* Features auto sharp blade design
* Lightweight at less than 1-pound
* Includes battery fuel gauge
* Cuts through hundreds of materials
Customer feedback:
1. The product does a great job cutting many things, but can easily choke on two layers of cardboard if it's tilted sideways by a bit. When it doesn't cut, often the blade is a fraction of an inch away from what needs cutting, and it's a feed problem. Keeping it straight helps a lot on thick things, and sometimes, angling the front downwards slightly can get it to bite and go smoothly.
If you are not feeding it something at maximum thickness, and are keeping it straight, it does a fine job. As for the safety switch, the tool is designed so that if you grab it with one hand, chances are the switch will be a bit forward of where your thumb is likely to end up. You will be a lot less likely to turn it on by mistake while grabbing it, but the trade off is that the button feels a bit forward of where you might expect it. But it's hardly a chore and stretching your thumb forward a fraction of an inch is all it takes.
2. So far this has been a great product that I think anyone who regularly shops here needs to consider. If you use it for nothing else then to cut up the cardboard boxes that your Amazon orders arrive in it will earn it's place amongst your other tools.
Like some here my family does a fair amount of shopping here and the cardboard boxes can pile up. We try to reuse them for other things, but sometimes they just get out of control and pile up. The Multi-cutter has helped handle this most recent episode, making the dispatching of several dozen boxes in various sizes and states of use and abuse a task that took only a few hours of steady work instead of several hours of frustratingly boring work.
In the, roughly, three hours of steady work the battery held out with no cutting problems until near the very end. I do have to say that running it that constantly is probably not recommended as the unit did start to get a little warm there at the end. As to the auto-sharpener feature this works very well. While cutting through a box from a vacuum cleaner I hit one of those heavy duty industrial staples and nicked the blade in a couple of spots. Thirty minutes worth of work later and the nicks were all but gone. By the end of my work you couldn't see where I had nicked the cutter at all.
MK Diamond 158252 MK-145 1/2-Horsepower 4-1/2-Inch Wet Tile Saw
The MK-145 4-1/2-inch wet tile saw cuts ceramic tile like a champ with a 155-volt 4 amp direct drive 1/2-horsepower motor. This lightweight 11-pound saw gives heavyweight performance with a 4-1/2-inch tile blade that cuts 45- and 22-degree miters.
Technical Details
* Powerful 115-voly, 4-amp direct drive motor is rated at 1/2-horsepower
* Capable of cutting 45-degree and 22-1/2-degree miters
* Runs off of standard household current
* Includes 4-1/2-inch tile blade
* Lightweight at 11-pounds with a compact and versatile design
Customer feedback:
1. This is a great little tile saw! It's easily worth twice the money. I bought it for a project that involved cutting 13 x 13 tiles for a fireplace. As long as you take your time, keep the water reservoir full and feed the tile slowly you should get good cuts. I've already made at least 200 cuts on large tile and the blade is still cutting like it did out of the box.
I really like the design; it's just like a little table saw. I have a lot of experience cutting wood on all kinds of machines but have never cut tile in my life. Inside of 5 minutes I was making all kinds of cuts with great results. I really like the ability to cut 45 and 22-degree angles by just tilting up the table face near the blade.
The only thing that I would change on this saw would be to make it out of metal instead of plastic. Then, of course you would probably have to pay 2 to 3 times as much for it. This is not necessarily a criticism, just an observation.
2. I own a small home improvement/remodeling company, on occasion I will need to cut a few tiles but have no use for a large saw. (I call a tile sub in for large projects). I have made probably 600 cuts so far with this saw and it has worked like a champ and payed for itself with the first use. It's a bit on the loud side and will spray water at you if you over-fill the reservoir. It has plenty of power though, and the fence works just fine if it's lined up properly. Cleanup is made easy by spraying it outside with a garden hose. It is light, portable and will suit the average person that needs to cut a few tiles just fine. The bottom line...if you intend to do some small tiling projects around the home such as a bathroom, kitchen or entryway then this will easily do the job, if your going to be laying 1000 sq ft of tile with lots of cuts then durability might be an issue!!
